The AR Sound GreenLink use a low capacitance wire (115pF/meter).Low capacitance is an important factor in
selecting a proper interconnect. The GreenLink interconnect contains Green cable pair, each Green cable contains two 22 AWG copper alloy twisted pair wires with Teflon™ (PTFE) insulation and fully screened.
Using double Green configuration enables delivering signal with one Green, while
the second Green is dedicated for delivering only power. Yet another benefit is optimising
the star ground connection-
The GreenLink 4 interconnect using the same double green configuration, delivering
signal with one Green, while the second Green is dedicated for delivering only power,
with DIN4 to DIN4 terminations for connecting NAC to NAP when there is no external
power Supply being used (Hi-
The GreenLink 4s interconnect with DIN4 to DIN4 or to XLR terminations is intended for connecting external power supply to NAP.
This interconnect use two Green cables in a pseudo-
The double green configuration in the GreenLink 4s interconnect delivers the Right channel signal with one Green, while the second Green is dedicated for delivering the Left channel signal.
Please note that the Green 4 Interconnect can also used to connect Naim PS to power-
The main pair of conductors in each Green cable twisted to further enhance RF rejection of the cable. first barrier avoiding RF noise from penetrating into the cable is the Silver plated OFC copper screen and the secondary treatment is the twisting of
the internal pair.
The main pair of twisted conductors in each Green cable is made of a special, aerospace grade copper alloy carefully selected after extensive listening tests for its superb sonic qualities and durability. the copper alloy wire comprises a silver content which allows for better bonding to the silver solder used to make this superb interconnect.
The interconnect insulation is made of Teflon™ (PTFE), PTFE is the best insulation
material used in the cables industry which has the lowest dielectric absorption.
Using Teflon™ (PTFE) as insulation is a prime consideration in Hi-
The low dielectric absorption of Teflon allow locating the main conductors in the
Green cable in very tight configuration-
Teflon is also highly durable-
The internal soldering pads of the PREH DIN connector are silver plated and this
ensures a perfect metal bonding in the solder joint between the copper-
Please note that the cable is directional: directionality mark is added-
The cable end near the logo goes to the NAC in the GreenLink 5 and GreenLink 4, While
in the GreenLink 4S the end near the band goes to the Super-
100 Centimetres of two shielded twisted pairs -
primary conductors Insulation: 1/16" PTFE.
Shield: silver plated OFC copper.
Resistance (per channel): 24 milliohms/meter (7.3 milliohms/feet).
Capacitance: 112 pF/meter (Hot to screen per single wire).
Outside Diameter: 6 mm
External colour: Semi-
AR Sound GreenLink interconnect include an anti-
This special high visco-
What is microphonicity?: Music played in the room produces vibrations in the air and the interconnect, and the vibrating cable transforms this energy into an electric signal that interferes with and distorts the original music signal travelling from the music source to the amplifier. Lowering the distortion caused by a vibrating interconnect is overlooked by most manufacturers.
The result is better focus and resolution, with a more solid bass line and dynamic presentation.
For ordering in USD or Euro select currency: